Optiva Matt 5


Tin Size & price: 2.7L | HK$735
Gloss Grade: Matt
Coverage: 7-9㎡ x 2 coats / Litre
Technical Data:
Eco Accreditations:
歐盟生態標籤 歐盟生態管理及審核計劃證書 ISO9001 ISO14001 Asthma & Allergy Label - Poland
High-quality water-based paint that produces rich and flat coatings with excellent effect, and it is highly scrub-resistant. Suitable for both interior walls and ceilings, as well as offices and public venues. Tikkurila’s Optiva range of products in Poland have been awarded the Allergy and Asthma Label.

Note: The price(s) shown above is (are) for white paints only. A tinting fee is charged for paints of other colours.

Enquiry: WhatsApp 90435525, Tel: 34602040, Email: info@igreenpaints.com  

Payment:  Payable to i-Green Element Limited, A/C No. 012-594-00050263, Bank Of China (HK) 

Address: Unit 304, 3/F, Hope Sea Industrial Centre, 26 Lam Hing Street, Kowloon Bay, Hong Kong

Country of Origin: Poland
Thinner: Water
Base paints: ‘A’ and ‘C’ paints. ‘A’ paint is white in colour and can be applied directly or upon being tinted, ‘C’ paint cannot be applied directly and must be tinted before use.
Chemical resistance: Resists cleaning chemicals and weak solvents.
Colour Range: Available in white and the complete Tikkurila Symphony Colour Collection.
Application Details:
Application method: Brush, roller or spray application.
Thinning: Thin with up to 10% of water if necessary.
Coverage: 7-9㎡ x 2 coats / litre on non-absorbing surfaces, but relatively lower on rough and absorbing surfaces.  This information is only intended as a guide. The actual coverage will depend on the substrate texture, absorption rate, construction methods, and many other factors.

The surface to be painted must be clean, dry and free of grease, dust and fibres. New walls: No painting should be done until at least 4 weeks after erection.   Unpainted surfaces:  Remove all dirt and dust. Fill cracks and holes with a suitable filler if necessary, and sand the dried surface. Remove sanding dust. Prime with Optiva Primer.

Previously painted surfaces: Wash down previously painted surfaces with a cleaning agent, rinse carefully and let dry. Remove loose, flaking paint with a scraper. Treat moulded walls with a suitable mould removing solvent and then rinse with water. Sand hard or glossy surfaces to a matt finish and remove sanding dust. Fill holes and cracks with a suitable filler and sand the dried surface. Prime the surface with Optiva Primer before coating.

Painting: Stir Optiva Matt 5 well before use and thin with up to 10% of water, if necessary. Apply two finishing coats by brush, roller or spray. Painting should be done on a dry wall at a ROOM temperature above 5℃ and a relative humidity below 80%.  Normally touch-dry in 1/2 hour and recoatable after 2 hours at a temperature of 23 ℃ and a relative humidity of 50%. Freshly painted walls should be carefully protected at least in the first 2 weeks.
Environmental and waste disposal Empty tins should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
Storage Protect from frost. Any remaining paint can be preserved for future use with the cap placed back on.
Shelf Life 3 years with the cap still intact. The expiry date is marked on the tin.
The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by Tikkurila’s operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer Tikkurila cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. Tikkurila disclaims liability for any damages caused by using the product against our instructions or for inappropriate purposes. Tikkurila reserves the right to change the given information unilaterally without notice.


Additional Information

2.7 L